|IN||VW, IW, QW, MW, SW, SMW, LW, T, C, AIW, AC, Constant, *VD, *LD, *AC||INT|
|OUT||VB, IB, QB, MB, SB, SMB, LB, AC, *VD, *AC, *LD||BYTE|
|Memory Ranges||ENO||Errors||Instruction Support for S7-200 CPUs||SIMATIC/International Mnemonics|
|The Integer to Byte instruction converts the word value (IN) to a byte value and places the result into the variable specified by OUT.
Values 0 to 255 are converted. All other values result in overflow and the output is not affected.
Error Conditions that Set ENO = 0:
0006 (indirect address), SM1.1 (overflow), SM4.3 (run-time)
These instructions affect the following Special Memory bits: