|IN||VB, IB, QB, MB, SB, SMB, LB, AC, Constant, *VD, *AC, *LD||BYTE|
|OUT||VB, IB, QB, MB, SB, SMB, LB, AC, *VD, *AC, *LD||BYTE|
|Memory Ranges||ENO||Errors||Instruction Support for S7-200 CPUs||SIMATIC/International Mnemonics|
|The Invert Byte instruction forms the ones complement of the input byte IN, and loads the result into byte value OUT.
Error Conditions that Set ENO = 0:
SM4.3 (run-time), 0006 (indirect address)
This instruction affects the following Special Memory bits: